| Customization: | Available |
|---|---|
| CAS No.: | 51762-67-5 |
| Formula: | None |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
High Gloss Marble Effect Self Leveling Coating
Epoxy Colored Sand Floor Paint
Epoxy Colored Sand Floor Paint,a two component solvent-free floating colored sand self leveling floor coating composed of epoxy resin and colored floating sand. It is a new type of flooring that combines both decorative and practical functions. lt can well meet the decoration and renovation requirements of various high-end public places and private residential floors.
Epoxy Colored Sand Floor Paint is a versatile and visually appealing flooring solution that combines the durability of epoxy resin with the decorative touch of colored quartz sand. This seamless flooring system offers not only a robust and long-lasting surface but also adds a vibrant aesthetic to various spaces.
| Tensile Strength (Mpa) | ≥9 |
| Bending strength (Mpa) | ≥7 |
| Shore hardness | ≥85 |
| Flowing Property (cm) | ≥5min |
| Wear resistance | ≤0.02 |
| Impact resistance | Level 1 |
| Resistant to 60% sulfuric acid | Does not blister, does not peel, allows slight discoloration |
| Resistant to 3% salt water | Does not blister, does not peel, allows slight discoloration |
-High strength, wear resistance and compression resistance, highly durable
-Waterproof and non-slip, strong adhesion, Clean and environmentally friendly, no harmful substances
-It dries quickly, and it is ready to use without delay
-Simple operation, brushing after opening the cover, low labor cost
-Scrub resistant, easy to clean and easy to care for
-The protective film has high strength and is not easy for stains to penetrate
Concrete floor , marble surface , old floor refinish , tile surface , It is widely use in office , parking lot, factory floor, hotel , bathroom , kindergarten , etc.
1. Electronic communications, cigarette factories, food factory, health care, petrochemical, textile,furniture, office accessories, and other industries, the need to compressive, impact resistance,abrasion resistance and requirement on the ground without even seam, high clean place.
2. High-grade entertainment, hotel, airport, subway, shopping malls, commercial buildings, exhibition center, office and lab attaches great importance to the aesthetic effect, at the same time, higher requirements on the abrasion resistance to pressure.
Step 01-Ground treatment, grinding, dust, leveling
Step 02-Roll on epoxy primer
Step 03- Batch scraping epoxy mortar layer
Step 04- Batch scraping epoxy putty layer
Step 05-The bread is coated with epoxy colored sand
Step 06- Flatten and flatten
Step 07- Apply clear protective varnish
Construction conditions:
1. Substrate requirements:
The painted surface of architectural coatings must be dry, firm, clean and smooth;
Dry: the floor humidity is lower than 6%RH, and the PH value is less than 10;
Firmness: no loose powder, no loose patent leather on the old ground;
Clean: Free of oil, grease, mildew, algae and other adherents.
2. Construction environment:
The ground temperature should not be lower than 5'c, and the ambient humidity should be lower than 85% RH to ensure good film formation.
3. Construction precautions:
This product can be appropriately added with diluent depending on different construction methods and construction environments, but the dilution ratio should be strictly controlled. Excessive dilution of the main agent and curing agent must be mixed in the correct proportion, The main agent should be mixed with an electric mixer first. Then slowly add the curing agent and stir well.
In 2022, it was recognized as a "national level high-tech enterprise". In the process of development, the company has established a standardized management system, achieving information management throughout the entire business process and refined production management. Product quality has continued to improve, domestic and international trade have steadily increased. At the same time, it has multiple production and processing bases currently. The products have been sold to various countries and regions around the world. The company always adheres to the business tenet of "quality first, service first and integrity first", serving and meeting the needs of customers and the market with perfect quality, prefect service and the most reasonable price.
1. Q: Are you a factory or trading company?
A: We are a factory, and also a trading company. We can provide a one-stop service for
our customers. And you can get the best price and competitive price.
2. Q: What can I buy from you?
A: Space capsule house, Apple cabin, Prefab Villas, Prefab Homes, Container Homes, Custom DIY Homes...
3. Q: How to install?
A: We will provide detailed installation videos in English videos to you after the delivery.
We also can provide remote video instruction.
4. Q: How long is your delivery time?
A: Generally it is within 5-30 days, definitely according to quantity and color.
5. Q: How can you guarantee quality?
A: Pre-production samples are always provided before mass production, and final inspection
is always performed before shipment to ensure that the product is free of any problems.
6. Q: Why should I buy from you not from other suppliers?
A: Over 20 years experience in this industry.Good quality and competitive price.
All certificates you need.Strong R&D team. Good after-sale services.
7. Q: How did you test the product before shipment?
A: We have the strict QC procedure, each product will be tested by 3 times with
professional machine before shipment.
8. Q: What about the payment terms?
A: TT100%, or TT50% deposit before production, 50% balance before shipment.
Other terms also can be negotiated.
9. Q: What services can you provide?
A: Accepted Delivery Terms: FOB, CIF, EXW;
Accepted Payment Currency: USD, EUR, AUD, HKD, GBP, CNY;
Accepted Payment Type: T/T,L/C;
Language Spoken: English, Chinese, Spanish, Japanese, Portuguese, German, French, Russian, Korean,
Hindi, Italian.
){kind=link}